Type what are you looking for
No results found.
LCD screen
Touch glass
Frame
Best option if your original display is
DAMAGED
BROKEN
NOT LIT
FLICKERING
NO RESPONSE
OUR PRODUCTS ARE GREAT BECAUSE
Premium quality
Overload protection
Surge protection
Overheating protection
Discharge protection
100% warrenty
HW protection
Short circuit protection
iPhone X, XS, XS Max, 12, 13, 14, 15, 13 mini, 12 mini, 11 Pro, 12 Pro, 13 Pro, 14 Pro, 15 Pro, 11 Pro Max, 12 Pro Max, 13 Pro Max, 14 Pro Max, 15 Pro Max, 14 Plus, 15 Plus
New
Soft OLED
Technology
Price
Colorful
Brightness
ORIGINALITY
Original
IC and flex cable
Polarizer
Digitizer
FUNCTIONALITY
True Tone
Face ID
NOTIFICATIONS
Early iOS 15.2
Unknown parts
Later iOS 15.2
Important Messaage
Refurbished
Non-original
Hard OLED
In-Cell
TFT
iPhone 6, 7, 8, 6s, 6 Plus, 7 Plus, 8 Plus, XR, 11, SE 2016, SE 2020, SE 2022
IPS
To retain the True Tone function after replacing the display, you must bring the original serial number to transfer to the new display using the programmer found in the Tools section.
Face ID functionality is not affected by the diplay replacement, the module is included with other parts. We recommend that you take extra care when replacing it.
The Unknown Part message (iPhone XS and newer) can only be deactivated using official software available from Apple Authorized Service Providers.
a new original display, made directly from the manufacturer/authorized supplier
Important message
The message "Important message or Unknown parts" appears on the screen when the display is replaced.
Quality
Suitable for customers who want to keep the original display or have higher demands on display quality (gaming).
Replacing the display
The entire display + touch glass + bezel is always replaced.
High quality
The main advantage is the high quality.
Preserving True Tone when replacing the LCD display with iPhone 11
Retain Touch ID after replacing the LCD display for iPhone...
Preserve Face ID when replacing the LCD display for iPhone 11
This is because the display replacement has not been approved by Apple's official software and the part has not been paired with your motherboard.
When you replace the display, a new adhesive (seal) is automatically applied to protect your iPhone against moisture and dust.
As this is an intervention in the phone, it cannot be guaranteed that your iPhone will be waterproof again after the service.
Tip:
Dust and moisture most commonly enter the phone through damaged camera glass and a detached display. To avoid the risk of further damage, such as oxidation or possible short circuit, we recommend replacing the damaged part as soon as possible.
When replacing the display, don't forget to:
We recommend using:
Warning: If you have received a damaged device from a courier, please notify our customer support (by email or phone) and the shipping company by which the ordered goods were delivered to you immediately (within 24 hours at the latest).
Possible causes
Solution
*Applies to a display that was purchased from us
Terms and Conditions and Complaints Policy*
#1 53 million tons of electronic waste are produced annually #2 E-waste is the fastest growing waste in the world #3 Only 15 - 20% is recycled
More about the terms and conditions of wholesale cooperation can be found here. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries and regions.
Contact us at eshop@fixservis.sk, use chat or read our conditions
1/5
Close gallery
Antistatic (ESD safe) liquid dispenser with a volume of 100 ml for cleaning solutions and chemicals with a mechanical pump and tray for easy collection of the dispensed liquid on a cloth or cotton swabs.
Match code
TOOL7350
Artikel
1100062979
A plastic container with a volume of 100 ml serves as a container for chemicals. The hand pump has an outlet in the middle of the tray and is very easy to operate. Press your head down 2 to 3 times with your finger or cloth and the dosing liquid is pumped into the tray. The contents of the bottle are closed after pumping the liquid, so that the volatiles do not evaporate. If you pump more into the funnel than you consume, the remaining liquid will flow back into the reservoir within about 1 minute. The ESD bottle is equipped with a closable hinged lid with a spring held in the open and closed position, there is no need to screw anything.
The liquid dispenser meets the requirements for ESD safe, so it is antistatic and there is no risk of unwanted ignition of the dispensed liquid by static discharge. In the ESD workplace, the static charge from the bottle is safely conducted to the ground.
The most common uses: alcohol or isopropyl alcohol, which is used for degreasing or washing away flux residues after soldering, technical gasoline, thinner and other flammable substances or non-flammable substances.
The color may vary ..
Shipping info here Claims info here
We are constantly improving our carbon footprint to protect our planet. Read more about how we are adapting our processes to reduce our footprint.
Sign up to receive regular information about discounts and news from our offer. At the same time, by submitting this form, I confirm that I am over 16 years old
Shopping basket
Subtotal
with VAT
This site uses cookie technology to enhance your experience. More information