Cleaning wipes 40pcs, Thermal Grizzly TG

Thermal Grizzly TG Cleaning Wipes for Thermal Interface Preparation

Cleaning Wipes 40 pcs, Thermal Grizzly TG Cleaning Wipes combine wet and dry cleaning cloths for preparing compatible contact surfaces before a new thermal interface is installed. They remove thermal-paste residues and grease, including fingerprints, which can interfere with a clean application. The retail pack is divided into ten sets, each containing two wet and two dry wipes.

• Wet wipes for removing thermal-paste residues
• Removes grease and fingerprints from compatible contact surfaces
• Dry wipes for the initial and final cleaning stages
• Useful before applying fresh thermal material
• Ten separately packed sets for convenient storage
• Total contents: 40 wipes — 20 wet and 20 dry

Use the wipes when replacing a cooler or renewing a thermal interface. Cleaned surfaces also help suitable protective accessories adhere. Keep the cleaning sequence organised so a used wipe does not reintroduce residue to a surface that has already been cleaned.

How to apply:

1. Switch off and disconnect the device, expose the intended surfaces and check their suitability for cleaning.
2. Remove stubborn residue with the first dry wipe.
3. Clean the surfaces with the two wet wipes as directed by the manufacturer.
4. Finish with a fresh dry wipe, then inspect the contact surfaces before applying new thermal material.

Important: Use the wipes according to the manufacturer’s instructions and allow the contact area to dry before reassembly. Cleaning does not establish that a surface is compatible with liquid metal; check that separately.