Thermal Pad 38x38x0.2mm, Thermal Grizzly KryoSheet

Thermal Grizzly KryoSheet Graphene Thermal Pad

Thermal Pad 38x38x0.2mm, Thermal Grizzly KryoSheet is a high-end graphene thermal interface designed as an alternative to upper-performance thermal pastes. Its structure provides very high and consistent thermal conductivity without liquid components, so it cannot dry out like conventional thermal paste.

• Graphene-based thermal interface for high-performance CPU/GPU cooling
• Consistently high thermal performance without paste curing or drying
• Very long service life and maintenance-friendly design
• No liquid carrier material
• Electrically conductive – precise positioning is essential
• Dimensions: 38x38x0.2mm

KryoSheet is particularly useful for enthusiasts and technicians who want a repeatable high-performance interface without spreading paste. It is not a conventional soft silicone thermal pad; it is a thin graphene interface intended for direct placement between the heat source and cooler.

How to install:

1. Remove all old thermal compound and clean both contact surfaces.
2. Check that the sheet size matches the intended heat-source surface.
3. Place the KryoSheet flat and accurately over the heat source without allowing it to contact surrounding electronic components.
4. Hold the sheet in position while installing the cooler and tighten the cooler evenly.

Important: KryoSheet is electrically conductive. Follow the manufacturer's instructions and ensure the sheet cannot shift onto exposed contacts or components.