Thermal Paste 1.5ml/3.9g, Thermal Grizzly Hydronaut

Thermal Grizzly Hydronaut Thermal Paste for Large Cooling Surfaces

Thermal Paste 1.5ml/3.9g, Thermal Grizzly Hydronaut is a silicone-free, electrically non-conductive thermal paste developed especially for medium to large heat-transfer surfaces. It is particularly well suited to water-cooling systems, while also being suitable for high-TDP processors, graphics cards and overclocked systems.

• Optimized for medium to large cooling surfaces
• Well suited to custom water-cooling systems
• Silicone-free formulation
• No curing period required
• Electrically non-conductive
• Suitable for overclocking and high-performance PC cooling
• Package: 1.5ml/3.9g

Hydronaut is the more application-focused choice when the cooling setup uses a larger contact area, especially with water blocks. Compared with a general-purpose paste, its formulation is aimed at flexible, consistent coverage across larger surfaces.

How to use:

1. Remove the old thermal compound and clean the CPU/GPU and cooler contact surfaces until they are dry and free of residue.
2. Apply a small amount of thermal paste to the centre of the heat spreader or chip.
3. Spread it into a thin, uniform layer with a suitable applicator, or use the application method recommended for your cooler.
4. Install the cooler evenly and tighten it according to the cooler manufacturer's instructions.

Technical note: For best results, focus on complete, thin coverage of the contact area rather than applying an unnecessarily thick layer.