Thermal Paste 2g, Thermal Grizzly Kryonaut Extreme

Thermal Grizzly Kryonaut Extreme Thermal Paste

Thermal Paste 2g, Thermal Grizzly Kryonaut Extreme is Thermal Grizzly's high-end thermal paste developed for extreme overclocking and very demanding thermal loads. Compared with standard Kryonaut, its formulation uses a smaller particle size and supports a thinner minimum application layer, while also improving low-temperature behaviour.

• Designed for extreme overclocking and maximum-performance cooling
• Optimized for a very thin interface layer
• Suitable for ambient high-performance cooling as well as cryogenic overclocking
• No curing period required
• Long-term durable formulation
• Electrically non-conductive
• Package: 2g

Kryonaut Extreme is intended for users who are already operating at the high end of CPU/GPU cooling. It makes the most sense in systems where every degree matters, including powerful water-cooled builds and competitive or cryogenic overclocking.

How to use:

1. Remove the old thermal compound and clean the CPU/GPU and cooler contact surfaces until they are dry and free of residue.
2. Apply a small amount of thermal paste to the centre of the heat spreader or chip.
3. Spread it into a thin, uniform layer with a suitable applicator, or use the application method recommended for your cooler.
4. Install the cooler evenly and tighten it according to the cooler manufacturer's instructions.

Technical note: The paste remains an electrically non-conductive alternative to liquid metal while targeting Thermal Grizzly's highest conventional-paste performance class.