Thermal Paste 6g, Thermal Grizzly Duronaut

Thermal Grizzly Duronaut Long-Life High-Performance Thermal Paste

Thermal Paste 6g, Thermal Grizzly Duronaut is a high-end thermal compound developed with a strong focus on both thermal performance and exceptional long-term stability. Its formulation combines specially engineered silicone oil with aluminium microparticles and zinc-oxide nanoparticles in optimized shapes and sizes.

• Outstanding thermal conductivity for gaming, overclocking and demanding cooling systems
• Designed for exceptional long-term stability
• Optimized particle structure helps reduce the pump-out effect
• Can be applied in a very thin layer to reduce thermal resistance
• Electrically non-conductive
• Does not harden over time under its intended use conditions
• Package: 6g

Duronaut is especially attractive for systems that are expected to remain assembled for a long time. The emphasis is not only peak performance but also maintaining a stable thermal interface through repeated heating and cooling cycles.

How to use:

1. Remove the old thermal compound and clean the CPU/GPU and cooler contact surfaces until they are dry and free of residue.
2. Apply a small amount of thermal paste to the centre of the heat spreader or chip.
3. Spread it into a thin, uniform layer with a suitable applicator, or use the application method recommended for your cooler.
4. Install the cooler evenly and tighten it according to the cooler manufacturer's instructions.

Technical note: For this relatively viscous paste, a firm plastic spatula can help achieve a controlled, thin and even layer.