Protective Coating against Liquid Metal 5ml, Thermal Grizzly TG Shield

Thermal Grizzly TG Shield Protective Coating for Liquid Metal Applications

Protective Coating against Liquid Metal 5ml, Thermal Grizzly TG Shield is a protective coating designed for components that could come into contact with liquid metal or other electrically conductive thermal materials. It supports preparation of the area surrounding a thermal interface. The integrated brush helps place the coating precisely on the intended protective areas.

• Protective coating for work with electrically conductive thermal materials
• Intended for preparation around liquid-metal applications
• Integrated brush for controlled application
• Drying time specified by the manufacturer: 30 minutes at 20°C
• Operating temperature range: -20°C to +150°C
• Contents: 5ml

TG Shield is used as a protective coating during cooling work on suitable hardware. Plan the protected area before beginning and distinguish it from the heat-transfer contact where the thermal compound will be applied.

How to apply:

1. Switch off and disconnect the device before exposing the work area.
2. Identify the components to be protected and prepare their surfaces according to the manufacturer’s instructions.
3. Use the integrated brush to apply the coating carefully to the intended areas.
4. Allow the coating to dry as instructed and inspect the application before proceeding with liquid metal and cooler installation.

Important: The coating does not replace precise liquid-metal handling. Follow the manufacturer’s instructions and keep conductive thermal material away from unprotected contacts.