Mechanic - ESD Fluid Dispenser - 180ml

Mechanic - Liquid Dispenser ESD - 180ml

A plastic container with a volume of 180 ml serves as a container for chemicals. The hand pump has an outlet in the middle of the tray and is very easy to operate. Press your head down 2 to 3 times with your finger or cloth and the dosing liquid is pumped into the tray. The contents of the bottle are closed after pumping the liquid, so that the volatiles do not evaporate. If you pump more into the funnel than you consume, the remaining liquid will flow back into the reservoir within about 1 minute. The ESD bottle is equipped with a closable hinged lid with a spring held in the open and closed position, there is no need to screw anything.

The liquid dispenser meets the requirements for ESD safe, so it is antistatic and there is no risk of unwanted ignition of the dispensed liquid by static discharge. In the ESD workplace, the static charge from the bottle is safely conducted to the ground.

The most common uses: alcohol or isopropyl alcohol, which is used for degreasing or washing away flux residues after soldering, technical gasoline, thinner and other flammable substances or non-flammable substances.